Photographs of my recent work at Elita, JP Nagar, Bangalore
- Published on
- Nandita Manwani
Related Articles
Featured among the top Women Interior Designers in Bangalore by Nearfox Magazine :). The original article can be found at
Today’s edition of Deccan Herald hosts an article on the value that an interior designer adds to the home making
The thought and the topic of this post came up during a recent drive to Ooty with my sister’s family.
One of the most tricky spaces at home in terms of design is the kitchen as it needs to be
I have been getting a number of questions from you on the Studio Range of Wardrobes post the launch &
Additional Pictures of Home Interior Design & Turnkey Interiors at Concorde Napa Valley Bangalore. These have been taken in daylight
Hi, These pictures have been lying around on my phone for a long time, finally ended up posting them on
This subject has been close to my heart and I had written this article a long time ago. Glad to
Perhaps the most valuable part of this blog lies in the conversations happening under each post. With over a thousand
Imagine a repository of 2000 Frequently Asked Questions and how to’s on interior design and home interiors….how cool would that
Some project photos of our Interior Design work way back in 2010
I have written about designing homes based on lifestyle of the inhabiting family, today I want to turn that concept
Over the course of the last few years the maximum number of queries I’ve received from my readers has been
Exited to announce that after 6 months of work we launched the new website for The Studio. For those of
Home renovation is an area that most customers struggle with, I hence thought it best to pen down our experience
The regular readers of this blog would have come across, in one of the earlier posts, this list of things
I was browsing over all the old posts on my blog and could not believe that this is a topic
News of senior citizens tripping, falling and injuring themselves at home is nowadays something that one hears of quite often.
Found my way to Chikpet/ City Market today after many many years. All this while I have been doing my
Just to let you know – we crossed the 1000 mark in comments & questions under the 25 posts on
Related Articles
Deccan Herald has started an “Ask the Expert” section in their Friday Homes & Interiors segment where I will be
Hi, These pictures have been lying around on my phone for a long time, finally ended up posting them on
The Pandemic has brought profound changes to the way people live – be it the requirement of constant sanitization, the
Some pictures that my client sent me last week of an interior project I did at Salarpuria Greenage nearly 3
Exited to announce that after 6 months of work we launched the new website for The Studio. For those of
Additional Pictures of Home Interior Design & Turnkey Interiors at Concorde Napa Valley Bangalore. These have been taken in daylight
"So how much will it cost"??? -- Usually the first question that I get from prospects. While for exact costs
Earlier this April I had written about our hunt for optimizing cost for Interiors and how that exercise took our
Building & Interiors Magazine in conjunction with Siemens India published my interview on the subject of Kitchen Appliances for the
Doing up a home is a deeply emotional journey for a family, one that represents years of savings, aspirations, and
Plywood Fakes in the Bangalore Market and a brief interaction with the Kitply Management on the same
A few days back I happened to get an email from a senior member of the Kitply Management team acknowledging
Home Interiors and Decorators This one is for readers who have or are in the process of renting out
Finally after long deliberations & doodling with friends and family the logo for The Studio is out…yooohoo 🙂 Based
The best-looking designs - and this is irrespective of the finish, colour selection or the money spent – are the
Today being an auspicious day we formally launched www.thestudiobangalore.com. It is a master site for The Studio Kitchens, The
I recently received a question from one of the readers of this blog on flooring options and recommendations and realised
We are all set to host our second Residential Interior Design Masterclass – this one will be on Home Lighting
We are shaking off the Covid stupor and launching our Internship program for 2021. Interested 3rd year Interior Design Students
November 3 it is — Just in case you missed the earlier two Masterclasses, here is another chance for you
Exited to share the first pics of my Exclusive Residential Interior Design Experience center coming up off Kanakapura Road. The
When working with an interior designer, home makers usually expect just good woodwork and carpentry. The Q&A below discusses why
38 thoughts on “Photographs of my recent work at Elita, JP Nagar, Bangalore”
Hi Nandita ,
do we get a pale green color scheme for kitchen in India ?
I liked the color scheme here .
http://www.housebeautiful.com/kitchens/dream/kitchen-otm-connecticut-1206
Swarna,
If you want the exact color scheme, finish, alignment etc. (the one in the photo you referred is duco painted hardwood) then you will need to import the kitchen that you have seen on the site.
Something similar can however be made in India using materials locally available
Rgds
NM
Hi Nandita,
I want a kitchen in either Red & White or Red & Black high gloss on Marine Ply. My kitchen is L shaped. Dimension would be 9 ft X 6 FT X 9 FT (height). Could you please let me know if high gloss is possible on Marine ply?
What would be the approximate cost for this kitchen?
Thanking you in advance.
Regards,
Anirban
Anirban – Yes Hi Gloss is possible on marine ply. For the costs pls go through my earlier post on "Costing your Woodwork – Do It Yourself Tips" – http://www.homedesignbangalore.com/2010/08/costing-your-woodwork-do-it-yourself
Good job done.
Are the kitchen shutters MDF with hi-gloss membrane or laminate?
Hi Gloss Laminate
NM
Hi Nandita,
Do you take up designing assignments in bangalore?
cheers,
wonderwoods
Yes
NM
Hello Nandita,
Can u design our flat pls??
Hi, You can reach me at nanditamanwani@gmail.com
Rgds
NM
Hi Nandita how much would be the cost of a good quality high gloss laminate.And how do we select the right quality?
thanx
Costs based on the brand and with time. Leading brands are Merino, Greenlam & Century not necessarily in that order.
Rgds
NM
Hi Nandita,
1) what's the material you have used for the bathroom cabinet in one of your photos?
2) It looks like the bathroom cabinet is not mounted on the floor and yet you have put the granite slab on top of it. Does a wall mounted cabinet have enough strength to bear the load of a Granite slab ?
Regards,
CG
Its Hi Gloss Laminate.
The granite will stay if its supported on two sides by a wall
Regards
NM
Hello Nandita,
I'm process of setting up my new kitchen cabinets. However I'm confused over acrylic shutters vs high gloss duco painted shutters. I thought that acrylic shutters are 2mm thick high gloss sheets that are attached to substrate. Some say they use acrylic high gloss paint. can you clarify the difference between these two
Acrylic shutters have an acrylic sheet pasted on top of an MDF/ Ply base. The same finish can also be obtained with Duco & PU paint. However Duco is not recommended for the kitchen.
Rgds
NM
Hello Nandita,
Can you advise whether glass top built in hob is suitable for indian cooking like roti making on open flame and baingan bharta etc? will the glass crack? which brand of hob and chimney will perform best? I have a budget of 25K
Many thanks for your advise,
RM
A glass hob is fine for any type of cooking, however it tends to get tiny scratches on it due to its glossy finish.
Faber, Elica or Kaff should be fine…there are a number of festival combo offers currently running that you can use to get stuff within your budget – check these out
Rgds
NM
Hi Nandita
i like Hi Gloss it looks nice & easy to maintain but i wanted to know is it skretch proof , durable & good for kitchen ? as i m in process of setting up furniture for our new flat…. some interior designer said like that Hi gloss easily get skretchs…..
Plz suggest…..
Thanks
Swati
In general, Yes Hi gloss is prone to scratches. However there are multiple varieties of Hi Gloss available nowadays with varying levels of scratch resistance. For e.g. if using laminates then Merino has a hi scratch resistant MR+ range in Hi Gloss Laminates which can be used for kitchen shutters.
Similar varieties are available in prelam MDF etc. as well
Rgds
NM
Hi Nandita,
I am a bit confused about the type of finish i should use for my kitchen cabinets.. Can you give a briefing about the various types of finishes available (laminate, membrane, hi gloss etc) and their pros and cons.. as in scratch resistance, durability, aesthetics, how they'll look over a period of time etc..
Thnx,
Neel
Check the comments section under the post at http://www.homedesignbangalore.com/2010/09/so-what-is-right-material-to-choose-for
and
http://www.homedesignbangalore.com/2010/06/so-what-is-modular-kitchen-and-some
your question is already answered there.
Rgds
NM
Hi,
For I kitchen please suggest glossy laminate/Acrylic/Lacquire which one would be good.
I like the Lacquire but not sure about the durability when age.
Thank u
Your question is already answered in the comments section under the post at http://www.homedesignbangalore.com/2010/09/so-what-is-right-material-to-choose-for
Please browse through
Rgds
NM
Hi Nandita,
Can I use high gloss laminate to mount my LED TV…..pls help
The Ply on which the laminate is mounted should ideally be 12mm or above
Rgds
NM
Hello Nandita,
I want to get my Kitchen woodwork done by the carpenter, as modular kitchen quotes do not fit my bill, but want same finish as that of the modern modular kitchens. I want the cabinets in Marine Ply, but for the shutters I want high gloss finish. One way to go for this is High gloss laminates, but I am more impressed seeing the acrylic sheet laminated shutters in the modular kitchen showrooms. How and where can i get these type of acrylic sheets for my kitchen cabinet doors and can my carpenter do that , or he will need special machines to apply these acrylic sheets.
Thanks,
Ujwal Abhishek
The modular kitchen shops will be able to get you just the acrylic shutters.
Rgds
NM
Hi nandita,I want to renovate my old brown painted doors.can u please give me some suggestions
I would suggest that you go for new flush doors as renovating the old doors will only cost slightly less than new flush doors. The above is not valid if your current doors are in solid wood (teak, sheesham etc.) like they used to be in olden days. If they are in solid wood then you may just get them repaired & repolished and they will be as good as new.
Rgds
NM
super designs n informative blog, does a tub , commode & wash basin can fit in 10*6 feet bathroom? is it possible to design or divide with door commode in one side n (rest tub shower washbasin ) in other side within this area. what could be the minimum budget to have this kind of bathroom? please dont include commode n wash basin value as its been provided by villa owner
Yes you should be able to fit all 3 in a 10X6 bathroom. The exact placement is dependent on the plumbing. There is no way to estimate the budget with the information provided, also, budgets really vary based on the quality of material and the workmanship.
Rgds
NM
Hi, are these acrylic sheets scratch prone? Does the gloss remain for long?
Does the regular fevicol stick this to plywood?
What do you recommend for edge, PVC, same acrylic sheet or teak needing with polish. Asking because when regular laminate is used in edges, leaves a black line and is sharp!
Any idea on quality of these sheets sold by euro?
Thanks
Acrylic or for that matter any hi gloss material does develop scratches over time.
There is a different grade of fevicol called probond that is needed for sticking acrylic to ply.
You may use the same PVC sheet on the edge (laminate is however not recommended for the edge as it chips off).
I have not used Euro's PVC sheets hence cannot comment
Rgds
NM
Hi Nanditaji,
I'm getting my kitchen renovated.
So which one would be better between GRASS and HETTICH?
Few of my trolleys are more than 31inch ( 34 inch long). The person from whom i'm getting trolleys done is giving me 30kg tandom box and 50kg for thali unit. Is it fine or I should ask for 50kg for all tandom boxes? Or grass will be better as its giving 40kg capacity?
Does this weighing capacity include both box's and inside stuff weight together? How much approximately weight of inside stuff I can go to?
Will soft close mechanism work and last longer for 30kg capacity?
And one more, can I go for PVC carcass?
Please guide, it will be big help.
Thank you.
Weight capacity of the channels = the weight of the box + the weight of the things kept in it.
You should decide on the capacity needed based on what you will store in the boxes – e.g for staples, rice, atta etc a 50KG is recommended while for the cutlery unit 30KG may be enough.
Gras and Hettich are equal in quality, just that Gras has limited distribution and after sales network currently in Bangalore.
For the Carcass I will recommend going in for regular BWR/ BWP ply as PVC is still to be proven as a reliable material for the same
Regards
Nandita
Hi Nandita,
Can a carpenter apply acrylic sheets ?
Thanks
The carpenter "can" definitely apply however the question really is whether you "should" have your carpenter apply acrylic sheets on site. For Paneling requirements it is OK but for shutters I would not recommend it as you may not be able to get the finish that you expect from the investment you are making. For shutters in acrylic it is better to go for factory made shutters.
Regards
Nandita