More Photographs – Elita JP Nagar & Brigade Gateway Malleswaram
- Published on
- Nandita Manwani

Related Articles
If you have not seen the “matka painting” pictures on our facebook page then do click here to check them
The regular readers of this blog would have come across, in one of the earlier posts, this list of things
It is a beautiful penthouse – top floor, some 3000 sqft with a huge kitchen, party area and the works.
The interest in Lacquered glass shutters for home interiors seems to have picked up lately in Bangalore. I’ve had a
While this project was completed quite a while back, we were able to take some good pics just last week.
Lately in a number of my projects I found lacunae left behind by the builder and the customers running around
We have been getting some love from the press lately :). Please read about it here https://thestudiobangalore.com/press-coverage Cheers Nandita PS:
Hi, These pictures have been lying around on my phone for a long time, finally ended up posting them on
My article below was published in Deccan Herald last Friday. The free text is pasted below. Happy reading Cheers Nandita
Plywood Fakes in the Bangalore Market and a brief interaction with the Kitply Management on the same
A few days back I happened to get an email from a senior member of the Kitply Management team acknowledging
You may read the full article at https://www.deccanherald.com/content/646811/a-guide-modular-kitchens/ Happy reading Cheers Nandita
We recently started hosting clients at our Interior Design Experience Center and it is a whole new feeling to do
My first article on this blog in the year 2010 was on the same subject. To make it more relevant
The Pandemic is forcing Interior Designers to think differently. The doubling up of the home as an office is inducing
I was browsing over all the old posts on my blog and could not believe that this is a topic
This blog is now over 7 years old and over these years a lot of what I have written about
Related Articles
Over the course of the last few years the maximum number of queries I’ve received from my readers has been
I have been getting a number of questions around Acrylic versus Laminate finish, where to buy Acrylic Laminates in Bangalore
One of our projects was recently featured by Houzz Magazine. Read all about it here 30 Kitchen Cabinets With Contrasting
We are all set to host our second Residential Interior Design Masterclass – this one will be on Home Lighting
If you have been on Bangalore roads in the last couple of weeks you would not have missed the huge
I wrote about the Eco range of interiors for 2/ 3 BHK apartments sometime back. Here are a few photographs
Plywood Fakes in the Bangalore Market and a brief interaction with the Kitply Management on the same
A few days back I happened to get an email from a senior member of the Kitply Management team acknowledging
Additional Pictures of Home Interior Design & Turnkey Interiors at Concorde Napa Valley Bangalore. These have been taken in daylight
Featured among the top Women Interior Designers in Bangalore by Nearfox Magazine :). The original article can be found at
This has been a topic that a number of readers of this blog have been requesting for since quite a
I recently received a question from one of the readers of this blog on flooring options and recommendations and realised
Modular kitchen at a project that I handed over earlier this week. Clicked this on my mobile phone and it
Times of India Online will now be featuring my Interior Design Blog. I have named it “The Culture of Space”
Two updates that happened over the last few days which we are very exited about The Architecture & Interior Design
Odd topic you would say, right? You will say “everyone needs a designer provided one can afford it”. You may
After spending a bomb on interiors in terms of resources, time and love – it’s painful to see things slowly
26 thoughts on “More Photographs – Elita JP Nagar & Brigade Gateway Malleswaram”
Very nice work! Really like the finish of the all the doors in the kitchen. Is this shutter board or ply/veneer combination?
Thank you Shiv, the kitchen shuters are in Membrane & Aluminium
NM
What kind of hardware you use for top opening shutters. Can you share their costing.
Regards
Sumit
Sumit: Huwil Hinges. If you have long shutters then it may need hydraulic pump type pull ups.
NM
I love the finishing of white kitchen in first 3 pictures. Is that the one made of Membrane & Aluminium. Is the base material aluminium or ply ?
Avik – I just noticed that I missed responding to your comment, sorry. The material is membrane & aluminium. Membrane is always on MDF
Regards
NM
Hi..The kitchen in dark brown..what is the material of the shutters. Also can you please let me know what is the color/texture name of the same.
Ashima – its membrane on MDF. Don't recall the exact shade. Also never choose colours/ textures based on photographs…physically see the samples to decide. The colour shades as seen in photographs can be deceptive
Regards
NM
I just loved the overall look and feel of the kitchen. I am trying to design one for mine, and your desing gives me a lot of ideas! I am not sure which hinges and fittings are better. Hettich/Ebco?
Thanks.
Both Hettich & Ebco are ok
Rgds
NM
Thanks Nandita for such a valuable blog. In your kitchen over the wall closets you have loft up to the ceiling. Is that a real loft or you have closed the gap with ply. I too wanted to have the same for my kitchen but my interior designer didn't agree. According to him since Wall closet are typically 15" deep they can not take the weight of the loft. You will have to create the full box. It would come out expensive to just create a 15" deep loft. I asked him to close the gap with some ply and he said it would be more or less equally expensive.
Thanks,
Juhi
Those are lofts – they actually are pretty useful & also hide the chimney ducting.
Cannot comment on the price & weight capacity etc. as it will depend on the material chosen and the design.
Rgds
NM
What is the cost per sq ft
PSFT costing works for standard designs – not for custom made & designed interiors
Rgds
NM
Hi Nandita..
What material do you use for the drawers below the sink? How did you take care of water seepage? is PVC better water resistant than plywood?
Usually the drawers below the sink are dummy as these dont have movement space due to the bowl of the sink. However you do get special U shaped drawers made of steel/ PVC for "below sink" use
Rgds
NM
Hi Nadita,
thanks for your blog. its very informative.
Whether Brass with stainless stell hinges discolor after some time or not. which is the best material for hinges for wardrobes.
thanks
giri
If you are buying a good brand such as Hettich, Ebco or Hafele/ Blum then steel hinges will do fine
Rgds
NM
Hi Nanditha,
Do you work on quartz countertops. Are they good? I wanted to have a whtie quartz countertop with maroon hi-gloss shutters (membrane and aluminium) .Does this sound good?
Regards,
Supriya
Your answere are here http://www.homedesignbangalore.com/2012/05/what-material-to-use-for-kitchen-slab
Rgds
NM
Hi Nanditha,
can u plz suggest MDF or HDF is better for wardrobes
Between HDF & MDF, HDF is better, however at the same rate you should be able to get Commercial Ply which is better than both HDF & MDF. Hence HDF does not make economic sense – which is really why you dont see HDF being used much in the market.
Rgds
NM
which brand is the best in cooking ranges with one hotplate of gas oven & grill. If hob is better, which brand is better.
A cooking range is recommended only if you are into heavy baking, else a hob is better as it allows storage space underneath. Elica, Faber, & Kaff are all good brands – choose the brand based on the particular model you like and any promotional offers running
Rgds
NM
I am almost finalizing rubber wood with glossy finish. this will be done on machine rather than hand made. How durable is it? heard about bending issue. Secondly seems to have gaps compared to membrane type. chances of cockroach and lizard entering. can we have air tight way? Thirdly rate is about 1900 since machine made. is it ok? Urgent advise appreciated.
Will suggest "framed" rubberwood shutters as these have high resistance to bending.
There should be no gap in a finished/ polished shutter.
I don't want to comment on the costs without complete details as that will be unfair. You may want to check out the market for rates in general
Rgds
NM