Modular kitchen at a project that I handed over earlier this week. Clicked this on my mobile phone and it just came out well …felt like posting it on the blog 🙂
More pics from the project will follow – so watch this space
Cheers
Nandita
Island Kitchen at my latest home interior project in Bangalore
- Published on
- Nandita Manwani
Posted in: Island Kitchen, Modular Kitchens
Related Articles
This blog is now over 7 years old and over these years a lot of what I have written about
Featured among the top Women Interior Designers in Bangalore by Nearfox Magazine :). The original article can be found at
The interest in Lacquered glass shutters for home interiors seems to have picked up lately in Bangalore. I’ve had a
So you have made your first visit to the market to decide on your interiors, visited @Home, HomeStop, Hometown, Home
I was wondering what to write next, sitting home under lockdown when my daughter recommended why not write something on
If you have been on Bangalore roads in the last couple of weeks you would not have missed the huge
You may read the full article at https://www.deccanherald.com/content/646811/a-guide-modular-kitchens/ Happy reading Cheers Nandita
It is a beautiful penthouse – top floor, some 3000 sqft with a huge kitchen, party area and the works.
I have often found that a number of things get left out when folks plan interiors for their home. This
Designing a home based on a theme aligns the space to what the theme fundamentally represents – things such as
I was browsing over all the old posts on my blog and could not believe that this is a topic
Two updates that happened over the last few days which we are very exited about The Architecture & Interior Design
This blog today hosts over 3500 Q&A on home interiors under different posts. For some of the more popular posts
With so many scrupulous and un-scrupulous designers, carpenters, interior-walas selling what they call "modular kitchens" these days it is good
Honoured to be featured by Femina in their list of the top Indian women who have left a mark in
Some project photos of our Interior Design work way back in 2010
Dear readers…this is just a short announcement that I am launching my own range of Hi End DesignerWardrobes under the
Chapter 1: It’s not the box babe’ – it’s your Life The boxes have taken over, where we live –
With the unorganized furniture retail market in India touching approx. $20 Billion, early bird online furniture retailers like Pepperfry, Urban
Finally did it!!! yoo hooo. This Nov the 17th our objective was to go beyond the written word on this
A couple of my Home interior projects were recently featured by Homify magazine. Do please see them in the links
Related Articles
I wrote about the Eco range of interiors for 2/ 3 BHK apartments sometime back. Here are a few photographs
Deccan Herald has started an “Ask the Expert” section in their Friday Homes & Interiors segment where I will be
I had written on this topic some time back on this blog, an updated version of the post was published
News of senior citizens tripping, falling and injuring themselves at home is nowadays something that one hears of quite often.
I was browsing over all the old posts on my blog and could not believe that this is a topic
Chapter 1: It’s not the box babe’ – it’s your Life The boxes have taken over, where we live –
Sometime back on this blog I wrote on a couple of topics, one around whether you really need an interior
Each space, the way it is designed, built, maintained, kept dirty or kept clean exudes a certain culture, that culture
We are shaking off the Covid stupor and launching our Internship program for 2021. Interested 3rd year Interior Design Students
Here is something that I had written sometime back that saw the light in Deccan Herald today for the
Found my way to Chikpet/ City Market today after many many years. All this while I have been doing my
Imagine a repository of 2000 Frequently Asked Questions and how to’s on interior design and home interiors….how cool would that
Stainless steel kitchens are gaining popularity in Indian homes, known for their durability, hygiene, and modern aesthetic. While traditionally seen
One of the most tricky spaces at home in terms of design is the kitchen as it needs to be
Lately in a number of my projects I found lacunae left behind by the builder and the customers running around
In all Total Environment projects across Bangalore, you will notice a set of general principles around which their homes are
Dear readers…this is just a short announcement that I am launching my own range of Hi End DesignerWardrobes under the
Designing a home based on a theme aligns the space to what the theme fundamentally represents – things such as
The best-looking designs - and this is irrespective of the finish, colour selection or the money spent – are the
Some project photos of our Interior Design work way back in 2010
My first article on this blog in the year 2010 was on the same subject. To make it more relevant
24 thoughts on “Island Kitchen at my latest home interior project in Bangalore”
Very informative articles..
Need ur valuable suggestion regarding our home Interior
1. Regarding kitchen carcass which is more water-resistant and termite proof HDF (HDHMR)or marine ply?
2. For staircase handrail which is more durable and cost effective among plexiglass and toughened glass? Any other glass alternative?
Thanks in advance 🙂
Responses in line below
1. Regarding kitchen carcass which is more water-resistant and termite proof HDF (HDHMR)or marine ply?
NM: Marine Ply has better water resistance as well as strength
2. For staircase handrail which is more durable and cost effective among plexiglass and toughened glass? Any other glass alternative?
NM: Toughened glass is fine to use …also easily available. For additional safety you may want to have it laminated but that is not necessary
Regards
Nandita
Hi Nandita, thank you for writing these articles. Its been a great help for a novice like me in preparing for the interior work of my home.
I have a couple of questions.
1. I want to "attest" the laminate on the ply using machine pressing. As I feel it looks better aesthetically. But my carpenter is advising against it. He says though machine press looks good, its not durable and will peel off. is he correct?
2. what is the best glue that you advice in either machine pressing or manual pressing?
Thanks in advance,
vijay
Hi Nandita,
Awesome blog. Thanks for sharing your knowledge.
What are the options for open drawers in kitchen ? Mainly used for veggies that cant be refrigerated like onions etc. I saw the hettich wicker baskets and they seem to be quite expensive ? Any other cost effective alternatives available ?
Looking forward to your reply.
Machine pressing gives a better and clean finish, good carpenters can match it but not all. There is no issue of peeling. The only issue is the overhead of transportation to and from the factory.
Regular Fevicol SH can be used as the adhesive – both for hand or machine pressing
Regards
Nandita
You can use steel baskets. The other way is to make open storage shelves and use regular wicker baskets available in the market … something like what is shown here https://goo.gl/images/VHkZ43
Hi Nandita, love your blog! I am trying to decide on a modular kitchen and needed some advice.. I am looking for a country kitchen look in white and grey but dont like the modern glossy look that acrylic and glass have …. Confused about duco paints durability … What is a good material for the shutters to get this look ? Need some panelling on the shutters, glass inlays etc… With a smooth finish … Would appreciate your inputs
Thanks Anuradha. The Comments under the post below have answers to your questions
http://www.homedesignbangalore.com/2010/06/so-what-is-modular-kitchen-and-some
Regards
Nandita
For modular kitchen with light damp walls, is it advisable to use WPC (wood polymer composite) 6 mm first in the wall and then BWP IS 710 plywoods 6 mm (both sides laminated) as the base in the wall. Should only nails to be used or only screws or a combination of both for best fixation
Hi Nandita,
What is the thickness of blockboard should I choose for my wardrobes? My carpenter suggested 19mm (without laminate) . is it fine?
First ensure to remove the source of the dampness. Any material you use will spoil with continuous exposure to moisture.
On the damp wall you can lay tiles and then use marine ply with laminate stuck on the ply with waterproof adhesive.
Modular kitchens use something called a minifix to assemble the carcass, neither nails nor screws are used
Regards
NM
You may use 19mm or 17/16 mm – assuming you are planning both side laminate. If you are planning one side veneer and the other side laminate/ paint/ polish then use 17/16 mm as 19mm will become too thick
Rgds
Nandita
Hi Nandita,
We are looking for kitchen countertops in light colors. Pls give us info about quartz is it durable and doesnt absorb haldi etc?
I have read article regarding kitchen countertop in your blog but it was article written long back right. Jus want to know currently available quartz in market are good usability wise?
Wats the material used for shutters here in the above pic? Our carpenter has suggested not to go with membrane finish as it will peel off from edges after using some time and not recommended for rough use as it happens in kitchen,and this wont happen in Laminate with edge banding. Is it true?
Will be waiting for your rply. Thanq
Hi Nandita. Please suggest me lighting for false ceiling of living cum dining room. Should we use a mix of cool or warm lights in cove lighting and down lights or it should be a single light. If single then which one in trend cool or warm white. Thanka
Avoid mixing cool daylight and warm white. Warm white makes the space looks warm and cozy while cool daylight makes it energetic and efficient. I usually use Cool daylight for the study and warm whit in the rest of the spaces.
Rgds
Nandita
Quartz is fine to use in Indian cooking conditions. The countertop in the pic above is Black Granite.
Membrane is not recommended in maid managed or rough use kitchens. Your carpenter's suggestion to use laminate with edge banding is correct.
Regards
Nandita
Hi Madam
Regularly I gothorough your bogs, will you write share something on below topics, since I found now a days lot of verity and improvements in these areas, at the same time adding lot of confusion over choice and prices etc.
– Lighting – down lights, cove lighting – especially COB lights fittings.
– Storage beds – Top lift ..will hydraulic fittings available with ebco works well? Or side drawer ?? or without storage?
– Choice of mattresses – Memory foam/latex foam, pocket spring, what thickness to choose etc..
Hi Nandita,
I am planning to paint my wardrobe doors (blockboard) with Duco or PU. The shop guy told to glue a 4mm MDF on top of blockboard to have a clean finish. But I read some where in your blog where you suggested not to combine two different types of material. Then what are the options left for me? do I need to sand the blockboard? If so pls suggest the procedure and the kind of grit to be used between the coats. Btw, I am using 19mm blockboard.
While it is ok to stick a 2/3 mm MDF sheet on blockboard for small shutters (typically kitchen shutters/ drawers etc.) the same is not recommended for long panels (Wardrobe doors) as this may lead to warping.
You should ask your carpenter to sand the blockboard to make it uniform. The carpenter will know the grit etc. to be used. In addition the initial layer of primer and patti will give it the required smoothness
Regards
Nandita
Thanks for the ideas, will surely write on these…watch this space
Regards
Nandita
Hi Nandita,
We are thinking of going with duco on mdf for wardrobe shutters.could you pls advice us on shutters of 7ft height with mdf + duco is fine or we need to use only blockboard?
Thanks for the rply.
Whats the material used for shutters in the above kitchen in pic, is it mdf+membrane or ply+laminate, liked the finish of the above one
You can use MDF, in some cases 7 feet MDF shutters warp/ bend slightly. If this happens you may use a door stiffener – this is a piece of hardware available from all prominent hardware manufacturers.
Rgds
NM
The shutters are in Ply & Hi Gloss Laminate
Rgds
NM